Archive for January, 2010

Samsung 2G Tool 3.4.0027 Update


Added:
GT-S3600I full support (Read codes, Unlock, Imei repair)(first in the world)
SGH-T409 support (Read codes, Unlock, Imei repair, flashing bin file)
SGH-A237 support (Read codes, Unlock, Imei repair, flashing bin file)
SGH-A177 full support (Read codes, Unlock, Imei repair, Flashing)
GT- S3100 flashing (other function already supported)
SGH-T219 full support (Read codes, Unlock, Imei repair, Flashing)
Do not mix T219 and T219S (different hardware)

Fixed:
C260B unlock,
X830 content flashing

Rapidshare Link: Samsung 2G tool 3.4.0027

Advertisements
NEW Update released for BB-KEY customers – FREE! Unlock Alcatel phones by codes, calculated via the IMEI. Unlimited unlocking, NO credits, NO logs – Absolutely FREE!

BB-KEY Alcatel Supported models:

Calculate code via IMEI + Provider ID;

  • Alcatel: OT360, OT203, OT708, VDF541, OT800, OT303, B331, I650, S621, OT660, E101FLIP, OT363, OT383, OT600, VM621I, OT280, V570

Calculate code via IMEI only;

  • Alcatel: S215, S218, S319, S320, S321, S520, S853, V670, S215, S218, S319, S320, S321, S520, S853, V670, V770, C700, C701, C707, C717, V770, C820, C825, C700, C701, C707, C717, V770, C820, C825, mandarina duck, Miss Sixty, Playbox, Elle N3

DOWNLOAD THE BB-KEY V1.15 UPDATE FROM HERE.

MT Box Nokia module activation for MT SonyEricsson and MT RED (Siemens)

Any MT Box model can be extended with additional modules, this allows you to use features from other MT Box models.
Example if you have MT Box SonyEricsson or MT Box RED you can activate additional MT Box Nokia module.
In this case you can use all software designed for MT Box Nokia on your existing MT Box SonyEricsson or MT Box RED.
To activate any module in 1 minute you need to have “GT server” , “MT Box PRO” or “MT Box” account with enough credits.
Module activation will be paid with 100 credits from your “GT server” , “MT Box PRO” or “MT Box” account.
After activation from your server or box account WILL BE DEDUCTED 100 credits and selected MT-Box will be ready MT Box Nokia module activation.

Please note:
Module activation process is irreversible, means once activated module cant be deactivated from your box.

Accounts which can be used for this activation:

  • GT server full access accounts
  • MT PRO accounts
  • BOX account

Credits needed for activation:

  • 100 credits

Best Regards GSMinfo

IMEI Change is Illegal in some countries so check law of ur Country !

Just for Educational use …

– You need two version of pwnage custom firmware (2.2) which one should have capable of bootneuter and ofcourse able to unlock baseband as well. The other is clear firmware which has no neuter and also no update baseband checked.

– First item you should do is restore you iphone with 2.2 custom firmware and neutered and unlocked and also it should be in 3.9BL!!!! it is very importand

– When you finish, you should find an another computer with 7.6.2 itunes version and ziphone 3.0 and originial 1.1.4 firmware

– Then switch your iphone to DFU mode by using 7.6.2 itunes version computer

– Then restore you phone to 1.1.4 original FW

– Then you have one error after finishing restore, ignore it and restart computer and iphone (by pressing home and power button) then connect them again. Then use ziphone 3.0 to ONLY activate it!!!

– then use ziphone3.0 to change imei

– after finished, it is good to restore original 1.1.4 FW again.

– when you check activation screen you will see that imei is faked one.

– then back to new computer with 8.0 itunes.

– put to iphone first recovery mode to restore your custom 2.2 firmware which has no neuter, no baseband update, no uprage BL.. if recover mode does not work switch it to DFU mode. then try again.

Work 100%

phone status will be;

– iphone 2G
– firmware 2.2
– Fake imei
– modem firmware 04.04.05_G

v3.3 revision 1.3, Public-Release

NK

– Added, FREE Universal BB5 SIMLOCK RPL Maker
(Possible to UNLOCK or LOCK to spesific provider)
– Added, Manage SIM option
(Used to Read or Write ‘Simlock.bin’ file to be used to make customized SIMLOCK RPL)
– Fixed, HWC write bug
– Minor bug fixes

Log: LOCKING to Provider with MXKEY software

Code:
Imei net: 353180037*******
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 8000000000000006
 
BLOCK 1:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
 
 
Backup already exist.
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.11863, Date: 26-01-2010
 
Product: V 07.23 17-07-09 RM-436 (c) Nokia             
 
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
 
Sending SecondaryBoot [rap3gv3_2nd.fg](0x3D00 bytes)  ...OK
Sending PreLoader(0x2E4 bytes) ...OK
Sending CustomLoader(0x596C bytes) ...OK
 
Calculating RPL using security server ...
Connecting to server[main.mxkey.biz] ...OK, Secure Login ...
RPL saved to "O:\mobileEx\3.3\data\backup\BB5_353180037364729_SIM.RPL" 
Updating SIMLOCK...OK
 
Reading Simlock info ...
Imei net: 353180037*******
Version: SIMLOCK SERVER
Provider: Polkomtel PLUS GSM, Country: Poland
Counter: 0/3, 0/10
 
CONFIG_DATA: 2600100000000000
PROFILE_BITS: 8000000000000006
 
BLOCK 1:   1=LOCKED (MCC+MNC): 26001F, DATA=26001F
BLOCK 2:   1=LOCKED (MCC+MNC): 26001F, DATA=26001F
BLOCK 3:   1=LOCKED (MCC+MNC): 00101F, DATA=00101F

Log: Unlocking with MXKEY software

Code:
Imei net: 353180037*******
Version: SIMLOCK SERVER
Provider: Polkomtel PLUS GSM, Country: Poland
Counter: 0/3, 0/10
 
CONFIG_DATA: 2600100000000000
PROFILE_BITS: 8000000000000006
 
BLOCK 1:   1=LOCKED (MCC+MNC): 26001F, DATA=26001F
BLOCK 2:   1=LOCKED (MCC+MNC): 26001F, DATA=26001F
BLOCK 3:   1=LOCKED (MCC+MNC): 00101F, DATA=00101F
 
 
Backup already exist.
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.11863, Date: 26-01-2010
 
Product: V 07.23 17-07-09 RM-436 (c) Nokia             
 
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
 
Sending SecondaryBoot [rap3gv3_2nd.fg](0x3D00 bytes)  ...OK
Sending PreLoader(0x2E4 bytes) ...OK
Sending CustomLoader(0x596C bytes) ...OK
 
Calculating RPL using security server ...
Connecting to server[main.mxkey.biz] ...OK, Secure Login ...
RPL saved to "O:\mobileEx\3.3\data\backup\BB5_353180037364729_SIM.RPL" 
Updating SIMLOCK...OK
 
Reading Simlock info ...
Imei net: 353180037*******
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 8000000000000006
 
BLOCK 1:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

Download from:
MX-KEY – Official mirror
http://rapidshare.com/users/P5JHS5
also available in support area and download page

Buy only from MX-KEY authorized resellers:
http://forum.gsmhosting.com/vbb/showthread.php?t=686432

MX-KEY v3.3 revision 1.3 public discussion thread:
will be added later

MX-KEY official web sites:
International – http://www.mx-key.com (in construction)
Indonesia – http://id.mxkey.biz/
India – http://www.mx-key.in

BR,
Manole

PS: Déjà vu , Déjà vu , Déjà vu

Hi,

– Added STANDALONE, FREE (NO LOGS, NO INTERNET!!!) NCK Reader (levels.. pw1..7) for ALL BB5 RAPv3 and RAPIDO phones (including 9ddb new hash, together PA_SL1 and PA_SL2 phones)
– Unlocking Method is now being selected before unlock
– Added BB5 RPL Calc for PA_SL1 phones (using server) for Simlock Repair
– Few changes with BB5 booting, minor bugfixes, cosmetic changes, etc

!! FIRMWARE UPGRADE IS MANDATORY IN ORDER TO USE THIS UPGRADE !!

KEEP IN MIND STILL SOME PHONES (I.E. TELCELL MEXICO) CAN’T BE UNLOCKED USING NCK, THIS CASE USE FREE RPLS.

Avaiable Unlock Methods Now:

Quote:
PM308 Recalculation (Standalone, Free)
NCK Calculation (Standalone, Free, New Method)
NCK Calculation (Standalone, Free, Old Method) Remark: Works only on SL2 Rapido Phones, SW < v30
RPL Calculation (Server Based, Need Credits)

(need select needed unlock method before unlock)

Some phones unlocked by new method of NCK Calculation:

3600 SL2 HASH 9DDB

Code:
BB5 Unlock Started...
MCU Version	V 07.23
MCU Date	17-07-09
Product		RM-352
Manufacturer	(c) Nokia            
IMEI		353661016041511
Mastercode	261533754
Simlock Server	SIMLOCK SERVER
Simlock Key	2600300000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1240001610F05850C9695BBBB518C05E116F9CA1
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: E4BA39EE248FC5E165E280B6AD60C5C0B1A1DA6D
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1240001610F05850C9695BBBB518C05E116F9CA1
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+949788008380325+1#
#pw+854251965631463+2#
#pw+914751634966481+3#
#pw+253083871743310+4#
#pw+160466531792339+5#
#pw+300636055043893+6#
#pw+831255876340647+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version	V 07.23
MCU Date	17-07-09
Product		RM-352
Manufacturer	(c) Nokia            
IMEI		353661016041511
Mastercode	261533754
Simlock Server	SIMLOCK SERVER
Simlock Key	2600300000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 26003F
Simlock NCK	#pw+831255876340647+7#
Unlock finished!

5300 SL1 HASH BAF3

Code:
BB5 Unlock Started...
MCU Version	V 07.20
MCU Date	23-10-08
Product		RM-174
Manufacturer	(c) Nokia.           
IMEI		356407014798521
Mastercode	471632634
Simlock Server	SIMLOCK SERVER VERSION 63
Simlock Key	2600600000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 26006F
Simlock NCK	#pw+@U˙˙˙˙˙˙˙˙˙˙+17#
Simlock NCK	#pw+˙˙˙˙˙8€+255#
Simlock NCK	#pw+`+38#
Simlock NCK	#pw+˙˙˙ř4&o˙+255#
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000353
CMT_PUBLIC_ID:		22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000353
CMT_PUBLIC_ID:		22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+160352032409019+1#
#pw+973120735381744+2#
#pw+821765151806152+3#
#pw+691221967364775+4#
#pw+282254235199826+5#
#pw+674406233058521+6#
#pw+159388652648611+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version	V 07.20
MCU Date	23-10-08
Product		RM-174
Manufacturer	(c) Nokia.           
IMEI		356407014798521
Mastercode	471632634
Simlock Server	SIMLOCK SERVER VERSION 63
Simlock Key	2600600000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 26006F
Simlock NCK	#pw+@U˙˙˙˙˙˙˙˙˙˙+17#
Simlock NCK	#pw+˙˙˙˙˙8€+255#
Simlock NCK	#pw+`+38#
Simlock NCK	#pw+˙˙˙ř4&o˙+255#
Unlock finished!

E51 SL2 HASH CAEEBB

Code:
BB5 Unlock Started...
MCU Version	V ICPR71_08w44.4
MCU Date	11-12-08
Product		RM-244
Manufacturer	(c) Nokia
IMEI		357663016552576
Simlock Server	SIMLOCK SERVER
Simlock Key	2600100000000000
Simlock Profile	8000000000000006
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 26001F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	A8C1D671
CMT_SECURE_ROM_CRC:	3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	A8C1D671
CMT_SECURE_ROM_CRC:	3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+994514387188636+1#
#pw+274615204717885+2#
#pw+842137240978606+3#
#pw+544842230747164+4#
#pw+653436892097337+5#
#pw+113577555381583+6#
#pw+360432392883102+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version	V ICPR71_08w44.4
MCU Date	11-12-08
Product		RM-244
Manufacturer	(c) Nokia
IMEI		357663016552576
Simlock Server	SIMLOCK SERVER
Simlock Key	2600100000000000
Simlock Profile	8000000000000006
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 26001F
Simlock NCK	#pw+360432392883102+7#
Unlock finished!

Download Link : http://rapidshare.com/files/340620565/Cyclone.exe

(REPLACE EXE at C:\Program Files\Cyclone Box\)

Best Regards,
“Sleeping” Cyclone Team

Added :

[X] NEW F188 SUPPORTED ( TEL_ID_P622C1V1.0.0B05-S )
[X] FIXED MF UNLOCKING BUG INTRODUCED IN 1.0.0.1338 VERSION

Download Link

More Comming Soon

Furious Team