Archive for June, 2010

By now, most of you might have heard rumors about the iOS 4.0.1 firmware update which Apple is preparing to release tomorrow in order to fix the ongoing reception issue on iPhone 4. Even though the issue is most likely related to the hardware, the buzz is that Apple is preparing a software fix in order to avoid (Apple sold 1.5 million iPhone 4s on the first day) what could be the biggest recall in the history of consumer electronics.

How to Save iPhone 4 SHSH Blobs (ECID SHSH) on iOS 4

TinyUmbrella has been updated to support iPhone 4 (running iOS 4). It is important to save SHSH Blobs (ECID SHSH) files of your iPhone 4 now because of all the rumors going around regarding a new firmware update, which could be released as early as next week. If you have your SHSH blobs on file, you can downgrade anytime to iOS 4 from iOS 4.01 should you need to.

Some important notes for iPhone 4 SHSH blobs before you proceed.

If you desire to restore your iPhone 4 to iOS 4, make sure you uninstall Wi-Fi Sync before trying to do so.

In order to obtain your SHSH you MUST have the device attached.

Restores on the iPhone 4 are not perfect. They error out locally but the restore does complete – it just needs to be helped along. (Much like downgrades where the baseband update fails). I’ll try to put the functionality in TinyUmbrella to fix this.

For Mac users: Copy the app OUT OF THE DMG. The reason you are getting the repeating password prompts is because you ran the app from within the DMG. This is bad. Copy it anywhere and you’ll be fine.

From here onwards, you can simply follow the steps that i have posted here for iPhone 3GS
and iPod touch. These steps are essentially the same for iPhone 4 except for some of the notes that I have posted above. Oh and if you want to learn more about what SHSH blobs or ECID SHSH files are, you can do so by reading one of my old article posted here.

Download TinyUmbrella (Windows)
Download TinyUmbrella (Mac OS X)

Original Source : redmondpie

Cyder 2

Download Via Rapidshare
Download Via Mediafire

Cyder Tutorial


For Ultrasn0w

Connect Iphone With Itune
Open Cyder
Just Copy
mobilesubstrate.deb
ultrasn0w0.9.3.deb

From Local Cache TO Autoinstall Folder
Restart Phone
done

For Ssh

Connect Iphone With Itune
Open Cyder
Just Copy

autossh.deb
openssh.deb
openssl.deb

From Local Cache TO Autoinstall Folder
Restart Phone
done

For Applications ,Games,Themes

Just Refresh Repo
Downlaod .deb
Transfer From Local Cache To Autoinstall Folder
Restart Done

VIDEO TUTORIAL

ONLY 1 ADRESS: MEPSERVER – The ultimate unlocking resources to unlock blackberry phones

ANOTHER UPDATE ? WHY NOT !?

Whats new ?

[X] G1157 P1.2PM02V01.03 SUPPORTED (Many thx to tictac_m)
[X] ADDED SUPPORT FOR FOLLOWING FWS

EF-CG-ZAIN-P108A19(S)V1.0.0B01
EH-IN-P108E6(S)V1.0.0B07
ER-UA-BEELINE-P108A28(S)V1.0.0B01

Download Link

Furious Team

on Windows 7/Vista/XP

Step 1: Put your iPhone into DFU Mode (not recovery mode)

  • Connect your iPhone to your computer.
  • Turn iPhone off.
  • Start iTunes.
  • Hold Power and Home buttons together for 10 seconds or so.
  • Release Power button but keep holding the Home button until your computer recognizes a new USB device.
  • iTunes will now recognize your iPhone.

Note: Your iPhone screen at this time should be blank (black in color), if not, then you are most likely in Recovery Mode, not DFU mode.

Step 2: Right Click on My Computer and click on: Properties -> Hardware (tab) -> Device Manager

Step 3: Select the “+” to open submenus tree items for “Universal Serial Bus (USB) Controller”.

Step 4: Now look for “Apple Mobile Device USB Driver”, right click and select Properties.

Step 5: Go to “Details” and find “Device Instance ID”.

Step 6: Simply scroll through the string and you’ll find the bootrom version (iBoot) as shown in the screenshots below:

Old Bootrom (Windows) iPhone 3GS – Old Bootrom 359.3

New Bootrom (Windows) iPhone 3GSNew Bootrom 359.3.2

Step 7: If it’s 359.3, you have old bootrom. If it’s 359.3.2 or anything above that, its a new bootrom.

on Mac OS X

Step 1: Put your iPhone into DFU Mode (not recovery mode)

  • Connect your iPhone to your computer.
  • Turn iPhone off.
  • Start iTunes.
  • Hold Power and Home buttons together for 10 seconds or so.
  • Release Power button but keep holding the Home button until your computer recognizes a new USB device.
  • iTunes will now recognize your iPhone.

Note: Your iPhone screen at this time should be blank (black in color), if not, then you are most likely in Recovery Mode, not DFU mode.

Step 2: Run “System Profiler” and navigate to: Hardware -> USB (menu on left).

Step 3: At the top right under “USB Device Tree” panel click “Apple Mobile Device (DFU Mode)”.

Step 4: Now down under in “Serial Number”, simply go through the string and you’ll find the bootrom version (iBoot) as shown in the screenshots below:

Old Bootrom (Mac) iPhone 3GS – Old Bootrom 359.3

New Bootrom (Mac)

Step 5: If it’s 359.3, you have old bootrom. If it’s 359.3.2 or anything above that, its a new bootrom.

Note: In both the cases above, it doesn’t matter whether your iPhone is an MB model or an MC model. As long as it has 359.3 bootrom, it is iPhone 3GS with old bootrom, and if 359.3.2 or above then it is iPhone 3GS with new bootrom.

for iPod touch 2G and iPod touch 3G

Bootroms are not applicable here, therefore rule of thumb for iPod touch 2G in order to identify if it is jailbreakable on iOS 4 is to check whether it is an MC model or non-MC model (which is usually MB model). If your iPod touch 2G is MC model, then it is not jailbreakable, for everything else, it is jailbreakable.

All iPod touch 3G’s are not jailbreakable on iOS 4. Like iPhone 3GS (new bootrom) and iPod touch 2G (MC model), they require a new exploit in order to jailbreak them on iOS 4. [Credits: Pece1976 on ModMyi]

PACK 3 NEWS (VLECOSTO_BETA_v1.0.0.2141.rar)
————-

[X] NEW BOOT LOCOSTO ALCATELS FULLY SUPPORTED (THX GOES TO EASON FOR PROVIDING THE KEYS)
[X] MODELS LIKE S211X/BIC PHONE, E227X, etc

FEATURES: (ALL AT HIGH SPEED)

READ CODE(S)
READ FLASH
WRITE FLASH (FACTORY AND RETAIL FWS – REMOVES PHONE CODE TOO)
SECURITY REBUILD (REPAIR SECURITY AREA/CHANGE – REPAIR IMEI)
DIRECT UNLOCK
RELOCK (ANY MCC-MNC YOU WISH)
WRITE LP
WRITE FFS

NEW FLASHES ADDED TO SUPPORT:

S211X-2DRGES2_121_815_04O_814_BIC_FULL_FLASH_NEW_BOOT.bi n
E227X-2EALES1_145_906_04O_905_FULL_FLASH_NEW_BOOT.bin

NOTE: IF YOU FLASH S211X SELECT AS CERT TYPE (TYPE 2) ELSE PHONE AFTER FLASH WILL RESTART IN BOOT LOGO. SIMILAR FOR OTHER PHONES WHERE SUCH PROBLEM APPEARS AFTER FLASH. FOR ALL REST LEAVE TYPE 1

PACK 5 (QCOM_SMART_TOOL_v1.0.0.4684.rar)
——-

[X] FIXED CORRUPTED DATABASE WITH SUPPORTED FIRMWARE BUG SO IS A MUST TO USE ONLY THIS LAST VERSION

MAINTENANCE 1.0.0.628 RELEASE (MAINTENANCE_v1.0.0.628.rar)

Maintenance Download

QCOM_SMART_TOOL_v1.0.0.4684.rar

VLECOSTO_BETA_v1.0.0.2141.rar

Stay Tuned More Comming Soon

Furious Team

CDMA-Tool v1.05 released:
.Haier-C2040 model supported (version MT04)
.Haier-C2076-Version-D model supported (phone must have diag enabled or flash with factory flasher and then make unlock)
.Samsung-SCH-B119 model supported
.Haier-C5000 firmware HA5000MT06 supported
.LG-RD-3510 version 3 supported
.operations buttons become visible/unvisible depends on supported operations for each model
.models list sorted by device name for more easy model selection
.models list updated
.minor bugs fixed

You can download new software here:
Index of ./files/software/

Infinity-Box 5 (five) years non-stop free updates and support: Infinity-Box – News

CDMA-Tool (fast and easy unlock)
Automatic pinout detection device
Language & Resource Editor for MT62xx based models
Extract phonebook (and other content) from alive and dead phone
Follow us on Twitter