Archive for July 22, 2010

ORT JTAG UPDATE
ORT Tool V1.15

Release Notes :

  • Samsung Flash Support Added for HD2 ( T-Mobile )

Supported CPUs :

  • QSC62XX
  • QSC6240
  • QSC6270
  • ESM7206
  • MSM6245
  • MSM6246
  • MSM6250
  • MSM6250A
  • MSM6260
  • MSM6275
  • MSM6280
  • MSM6281
  • MSM6290
  • MSM7XXX
  • MSM7200
  • MSM7200A
  • MSM7201
  • MSM7201A
  • MSM72XX
  • MSM7225
  • MSM75XX
  • MSM7500
  • MSM7500A
  • MSM7501
  • MSM7600
  • QSD8250
  • QSD8650

Support Page Changes :

  • ORT Tool V1.15
  • Samsung C5510 JTAG Pinouts
  • Samsung S7350 JTAG Pinouts
  • Samsung L810/L810V PS_HOLD Point
  • Samsung L810/L810V Service Manual
  • Samsung i8510 JTAG Pinouts
  • Samsung i8510 Service Manual
  • Samsung SCH-W900 Pinouts Revised
  • Samsung Z500 Pinouts Added
  • Sony Ericsson XPERIA X1 Radio Dump
  • Sony Ericsson XPERIA X1 SPL Dump
  • HTC HD2 Telstra Smart Repair File

New Support Page is ONLINE

www.ORT-JTAG.com

  • More Manuals ,
  • New Pinouts and Well Organized .!
  • Support Page Activation Procedures are here or here

Special Thx to Real JTAGgers Zine , Zamolxis , Oblio , 24Gsm , and all other members of ORT Forum for sharing and testing

ORT is a Real JTAGger’s choice

www.ORT-JTAG.com

Why to Update Firmware?

The question is why we should update the firmware of our maemo device? There are many reasons to it like:

* Bug fixes in new firmware
* Stability and improvement in new firmware
* You have corrupted the software of your device
* A virus has corrupted it, though it is very rare if you take little care
* Introduction of new feature in the firmware
* And sometimes for debranding

Methods of Firmware Update:

There are three common and easy methods of updating the firmware of N900.
1. Via Nokia Software Updater:

It is easy and most recommended method to upgrade the firmware of maemo device. If there is new firmware update is available, this is the recommended way to do it. You can see more details here how to update using NSU.
2. Manual Method using Flasher:

Here I want to explain the manual method of flashing your device. This method is recommended if you are reinstalling the same/latest (but not the newest which will be available through NSU only) firmware which you have already on your device.

Step by Step Method of Flashing using Flasher:

This method is windows based method (esp XP), but if you have got other operating system (Mac or Linux), you can get a link.

* Download and install the latest version of Flasher (e.g. maemo_flasher-3.5_2.5.2.2.exe).
* Download the latest firmware (.bin) file and save to ‘c:\Program Files\maemo\flasher-3.5\’
* Fully charge the battery.
* Unplug charger and switch off the device.
* Open the command prompt on XP. Start + Run. Type cmd and press Enter.
* Change directory to the flasher program

cd “c:\Program Files\maemo\flasher-3.5”

* Connect the USB cable while pressing ‘u’ key on the N900 (The detailed procedure of connecting the N900 is here).
1. Turn off Maemo device
2. Press and hold down key ‘u’
3. Connect USB cable between Maemo device and host PC while holding down key ‘u’
4. When USB cable gets connected it powers Maemo device and set’s it to flashing mode
5. When USB icon appears on right upper corner Maemo device is in flashing mode
6. You can release key ‘u’
* Run the following command:

flasher-3.5.exe -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin -f -R

The update will take about 4 minutes after which the N900 will reboot and display the Welcome screen with Regional settings.

You may experience problem if you are running windows seven/vista. You will have to flash the device in xp mode under Seven x64 and it will work perfectly.
3. via Seamless Software Update (SSU):

This method is same as FOTA (firmware over the air) in symbian mobiles, but it has been named as Seamless Software Update (SSU).

Your N900 will notify you of an update when one becomes available, just as it does for application updates. You may initiate the update process immediately or, if you prefer, ignore it for the moment and wait until your phone is, say, fully charged and on a good WiFi connection.

The process is:

1. A blinking notification–the same as appears when application updates are available–appears in the status area of your N900.
2. Tapping the notification opens the Application Manager which automatically shows the available update. (Should you decide to hold off on installing the update for any reason–busy, low battery, on expensive data connection, etc.–you can close Application Manager. The SSU will remain waiting in the “Update” area of Application Manager until you’re ready.)
3. Tap the update to begin the download and installation process.
4. Your N900 will prompt you to make a new backup of your data and settings just in case. Making a backup may be skipped, should you want to throw caution to the wind.
5. Your N900 will close all open applications.
6. Your N900 will download the update.
7. Your N900 will automatically install the update.
8. Your N900 may reboot.
9. Done.

vıdeo Link here please CLICK HERE

Code:
http://img19.imageshack.us/img19/7903/n900vdo.swf

screenshot

We all know why Geohot left the whole jailbreak scene. He has already deleted his Twitter account, and his blog is set to invite-only viewing only. However before deleting his Twitter account, Geohot said to follow his friend Mike Cohen for all the future updates on jailbreak. He also said that “perhaps one of these days i’ll do a more formal goodbye”.  And now it looks like he is probably going to make a comeback (perhaps for the last time?) with a new tool to jailbreak all iOS devices once and for all. This is what his friend mikecohenn wrote today:

Is  Geohot back

What’s a good time to make it ra1n?

Of course we are all speculating here, but we cannot rule out this possibility. As MacStories notes, it may be possible that Geohot closed his blog and Twitter account to make a comeback under a new name. Lets wait and see how this story develops. Will the new “ra1n” be released before comex’s Spirit-like upcoming userland jailbreak for all iOS devices? We don’t know for sure. Only time will tell how much of this is going to come true. Let us know what you think about this in the comments section below.

Earlier today, the guy behind Spirit jailbreak tool came out with a series of tweets which hints towards the possibility of the “next version” of Spirit jailbreak tool coming very soon. We don’t know for sure if it will be called Spirit or Spirit v2, but what we know is that it is based on userland exploit, and that it will work with all iOS based devices including iPhone 4 on iOS 4.0.1 / 4.1 and iPad on iOS 3.2.1.

Spirit Jailbreak

I’m not waiting for 4.1 so I hope everyone has SHSH blobs saved. :p

SHSH blobs for 4.0.1 or 4.0 are fine; AFAIK there are no substantive differences except the bars :)

To be clear: if I don’t run into problems, it will work on 4.0 or 4.0.1. No need to update to 4.0.1. SHSH blobs for either are fine.

So if you haven’t already, check out our following guides to save your SHSH files so that you can downgrade back to the older firmware should Apple patches the exploit used by this new upcoming jailbreak tool.

Its finally here! Skype app for iPhone and iPod touch has finally been updated to support the new multitasking feature in iOS 4. With this new feature, you can now receive calls and instant messages with the app minimized in the multitasking tray.

Skype  for iOS 4

Run Skype in the background with multitasking in iOS4. Receive Skype calls and IM while other apps are running or when your iPhone is locked. You can also continue your call while you switch to another application. Multitasking is available only with iPhone 4 and iPhone 3GS.

Now if only Skype brings out Skype-to-Skype video chat for iPhone 4, along with support for iPad, it would be complete !

Skype for iPhone was first released back in March 2009 and since then has only got a few minor updates.

Download Skype for iPhone, iPod touch and iPad [iTunes Link]

Martech RCDPRO PC – Technisat and Kenwood continuation..

Supported functions:
Reading radio code (Making new code in case of not found code)
Showing and resetting counter of tries

Supported:

Skoda Beat by Technisat, SKZAZ3, 5J0 035 152 [24c16]
Skoda Dance by Technisat, SKZAZ4, 5J0 035 161A [24c16]
Skoda Melody by Technisat, SKZAZ2, 1Z0 035 152C [24c16]
VW RCD 210 Caddy by Technisat, VWZAZ1, 1K0 035 156 [24c16]
VW RCD 210 by Technisat, VWZAZ1, 5M0 035 156 [24c16]
VW ULVWCD by Technisat, VWZAZ1, 1K0 035 156 [24c16]
VW ULVWNFZ20 by Technisat, VWZAZ1, 2K0 035 156 [24c16]
VW ULVWMP3 by Technisat, VWZAZ1, 5M0 035 156B [24c16]
VW ULVWMP3 by Technisat, VWZAZ1, 5M0 035 156 [24c16]
VW ULVWMP3 by Technisat, VWZAZ1, 1K0 035 156A [24c16]
VW Gamma V by Technisat, VWZAZ3, 1J0 035 186D [24c08]

New models for Kenwoods :
Kenwood DNX-7200 [24c08]
Kenwood KVT-719DVD [24c08]

How to update? Simply run your latest rcdpro.exe on PC or download
from Support Area on our forum.

MARTECH Products

GSM Sections:

MDM (Modem tools) Supported Models
QUL (Lg tools) Supported Models
VSZ (Sagem,ZTE,Huawei,Vodafon tools) Supported Models
ALC (Alcatel Tools) Supported Models
SIEM (Siemens BENQ service)

CAR Setions:
RCD PRO (decoding RCD310,RCD510 itd… sevice) Supported Models
RCD (Radio car decoding, over 1300 models supported) Supported Models
DST (Car dashes) Supported Models
SQM (Scooter, Quads and motors dashes) Supported Models

Laptops and batteries Section:
SBS (Bios & HDD password, battery repairs) Supported Models

Service Manager

MSM (Martech Service Manager) martech.pl :: View topic – MSM Service Manager – updates here

Service Hardware:
Analyzer (Battery Analyzer, charger, tester, supplier) Analyzer
CLIP (dedicated for standalone applications) CLIP
BOX II Plus BOX
Key (the cheapest usb dongle on the market) Key

Resellers list:
Reseller

Want to join and support Martech Team on whole world ? We can give very good conditions and profits, contact: martech@martech.pl

Martech Team.
MARTECH Team – Official WebSite
martech.pl :: Forum index